Nick
Full Member
1990 4Runner
Posts: 146
|
Post by Nick on Mar 3, 2004 23:41:06 GMT -5
Anyone know how to make the steering a little easier, also is there any way to make it steer sharper? Whenever i turn it goes so wide i go into the other lane (dangerous)
|
|
|
|
Post by fourwd1 on Mar 4, 2004 15:54:57 GMT -5
1) Check your toe-in.
2) Is truck stock or lifted? If you have a lot of lift and don't have cross-over steering, you're bound to have some steering problems.
|
|
|
|
Post by Whiteknuckle on Mar 8, 2004 22:02:36 GMT -5
If your streering is loose, you have a lot of free play and your truck waunders a bit; you can repair the draglink ends and that will help a bit.
How much lift does your truck have?
|
|
Nick
Full Member
1990 4Runner
Posts: 146
|
Post by Nick on Mar 9, 2004 1:36:07 GMT -5
Im not sure the exact amount of lift but the bottom of the body is 29 1/2 inches off the ground. The turn stops are all the way in, i just cant figure out why its turning radius is so crappy.
|
|
|
|
Post by Shibby24 on Mar 9, 2004 15:54:13 GMT -5
Does it have the stock Draglink?? If it does that would probably be making your turning radius a lot smaller. On my 85 when I lifted it I also used an adjestible drag link. My steering isnt as good as stock, but without it I wouldnt of been able to safely drive it... just a thought... Check that out...
|
|
Nick
Full Member
1990 4Runner
Posts: 146
|
Post by Nick on Mar 9, 2004 16:15:38 GMT -5
Would you happen to know where i could get one?
|
|
|
|
Post by Shibby24 on Mar 10, 2004 15:57:49 GMT -5
I got mine through NWOR when I bought my lift from them. I know other places sell them as well.
|
|
