|
|
Post by kevs83yota on Jun 17, 2004 11:02:15 GMT -5
dose anyone know about quick release hinges. the custom doors are made out of stock doors. i want to be able to just lift the door off to change doors, but i cant find a bracket or hinge to fit in that flat and small of space.
|
|
nate650
Full Member
don't let yesterday use up to much of today
Posts: 114
|
Post by nate650 on Jun 17, 2004 11:33:21 GMT -5
Just unbolt them, there is only 4 bolts on each side.
|
|
|
|
Post by kevs83yota on Jun 17, 2004 13:44:45 GMT -5
im to lazy, Ill figure some thing out. Thanks for nothing!
|
|
|
|
Post by stang65vrm on Jun 21, 2004 20:34:51 GMT -5
tankota.com this guy has em
|
|
|
|
Post by TuRDTOYODA on Jun 21, 2004 22:57:57 GMT -5
I am toying with the idea of drilling out the hinge pin and using clip-pins (from a tractor or trailer hitch ) to put in the place of the center pin. Then I can just pull the pins and lift the doors off. What do ya think?
|
|
|
|
Post by lal357 on Jun 22, 2004 18:02:50 GMT -5
when i took the doors off my 80 toy for some tube doors i just got some 5/16 th long shank bolts and cut the threads off then drilled a small hole for a pin now i just pop the pin and can swap out in a few secs
|
|
|
|
Post by kevs83yota on Jun 22, 2004 18:18:13 GMT -5
can/ will you post some pics?
|
|
|
|
Post by lal357 on Jul 2, 2004 6:48:50 GMT -5
sorry man got tied up with work i'll take pics today after work and post aint nothing to it tho
|
|
|
|
Post by lal357 on Jul 3, 2004 12:17:47 GMT -5
|
|
|
|
Post by jacksh002 on Jul 13, 2004 13:02:41 GMT -5
trailer hinges would work too,(so it seems) the pin and shank style that is used on a lot of lawn maintinance trailers. where there are two pins, high and low that you would put on the door, with the shank (like a sleeve) to the door in the same location in relation to the placement of the pins on the body, and then you could slide them on from the top(the sleeves/shank over the pins), and gravity holds them on, or if you really want to get em to stay drill a hole through the pin, and insert a pin through that . if not, just go to a junk yard and rape a jeep of it's hinges and acc. ? i believe they are the same design... but the design lal357 has shown work too, as seen in the pics. - BeN²
|
|
