79-85 Tube Shock Hoops -- PICS NOW AVAILABLE

[TubeWerx]

I have several custom built tube Shock Hoops available. They are made from 1.75" OD, DOM, .120 wall, steel round tubing. They replace the factory front shock towers on 79-85 pick-ups and 84-85 4Runners, allowing for a much longer shock (12"-15"), and offer the suspension increased articulation. Similar products are made from weaker 1.5", .095 wall tubing, and cost more. These are built strong for serious rockcrawling, and are $49/Set of 2. $59/Set of 2 with custom cut "SpiderWebz" designs. **Requires cutting off of factory shock towers, and weld-on install. *May require some minor inner fender modification.

for interest, pics and/or more info e-mail:
[e-mail]

[4xfred]

;D Post pics in the '85 & earlier forumn! Anything in the works for us IFS guys?! ;D Later...

[TubeWerx]

Yea, i'm getting the pictures developed today (not digital), but i'll scan them and try and get one up! Any trick to posting a pic on this board, never done it?? No IFS hoops available yet, obviously these hoops will work on 86-95 trucks with a Solid-Axle swap, but I will design some IFS hoops if the demand is high enough, or I can make you a special pair for a 1-time deal. Just need to come up with that pic now......

[bentmetal]

are they only for a single shock or do you have a dual set up?

[TubeWerx]

They can be set up for single or dual arrangement! Most hoops I sell are single application, but I can definately accomadate the dual set-up for you. If you have a special or different dual set-up than side-by-side, we can custom design that too. Basically, the hoops are pre-fabbed in our shop for basic set-ups, but anything can be modified if you have a particular need. Thanks for the replies, pics should be up by early next week!!! ;D

[TubeWerx]

I now have pics available, e-mail me with interest at [e-mail] HOW CAN I POST A PIC ON HERE? HELP, I'M NEW TO ADDING IMAGES!!

[Dobi]

Compliments of: mkelly.proboards22.com/index.cgi?board=readme&action=display&thread=1073931264

Now to post that picture: First, you have to have a web site to put your pics on. I use www.imagestation.com. www.cardomain.com is another good one. Open another browser window with image station (or whatever site you use), right click on the pic, click on properties, copy the URL, go back to your post, click the image icon, paste the link (remember to delete URL).

Ex: clicking the image icon .... then paste your image link http://whatever site.com/img.gif[/ img].

NOTE: If you would like to have all of the text on top of the picture then hit ENTER (on the keyboard) before clicking on the image icon. Vise versa for text under the picture. If you don't hit ENTER then any remaining part of the text line will end up at the bottom left hand corner of the picture.

NOTE: If you want to post just trail pics then post them in your region of the IN YOUR TOWN forum. For more inforamtion on this check here mkelly.proboards22.com/index.cgi?board=readme&action=display&thread=1074718132

NOTE: On all of the examples if you noticed there is a space within some of the backets. Do not do this. I only did it here to kill the link setting so that it shows actual text.

[TubeWerx]

Thanks Dobi!!! I'll see if I can get something posted in the next few days -- thanks again for the help!!

[TubeWerx]

......hmmm Having trouble getting pics up? Don't know what the deal is?? PLEASE e-mail me for pics if you are interested at [e-mail]

Response has been a little lower than expected so PRICES ARE NOW $39/Set, and $49/Set with webs!!!

[Dobi]

send pics to [e-mail] please

[TubeWerx]

Dobi,

I sent you a pic!

Brian @ TubeWerx