|
|
Post by 86taco on May 29, 2007 17:42:02 GMT -5
My buddy is scrapping out a 88 isuzu and I was wondering if the lockouts are the same as yotas. They are aisin hubs and look similar. I can get them for free, so if they are the same ist a good deal. I dont know if the internals are the same. I know the nissans are six lug same as yotas but dont know it isuzu's are the same bolt pattern, if that makes any difference.
|
|
|
|
Post by mississippimud on May 29, 2007 21:53:15 GMT -5
call your local parts house and ask them to look up lock outs for your pickup and then ask for the suzu see if they they the same part....easy as pie...I do it alot on small engine stuff y local parts house I buy alot of stuff from doesnt mind at all..
|
|
|
|
Post by fourwd1 on May 30, 2007 7:20:59 GMT -5
My buddy is scrapping out a 88 isuzu and I was wondering if the lockouts are the same as yotas. They are aisin hubs and look similar. I can get them for free, so if they are the same ist a good deal. I dont know if the internals are the same. I know the nissans are six lug same as yotas but dont know it isuzu's are the same bolt pattern, if that makes any difference. If you mean 6 lug wheels, yes, Isuzus are the same bolt pattern as Toyotas, but that has nothing to do with locking hubs. The key issue here is spline count. That's why you can't run hubs from an IFS Toyota (86+) on a solid axle Toy, the axle shafts have a different spline count. |
|
|
|
Post by 86taco on May 30, 2007 16:21:34 GMT -5
I know mine are 30 spline. I called the parts store and they didnt have a listing for the ishitzu. I will just pull one of them and check it out.
|
|
