Dobi
Junior Member
Posts: 52
|
Post by Dobi on Aug 21, 2005 20:34:28 GMT -5
I've been doin searches and finding all kinds of info here and there but no full write up. Does anyone know of any ??
|
|
|
|
Post by Forgotten on Aug 21, 2005 22:21:27 GMT -5
youd probably just need to buy like an s10, blazer or jimmy and convert er over
|
|
|
|
Post by rockcrawlintoy on Aug 24, 2005 16:23:13 GMT -5
its goin to be like any motor swap. u need the motor and the harness and prolly the tank. then u swap it over. the disscussion about the adapters and what not will be disscussed prolly in most threads that are talkin abot the swap
|
|
ak106
New Member
Posts: 17
|
Post by ak106 on Nov 9, 2005 1:25:55 GMT -5
check out 4wheel &off road magazine april 1999 page 40-41 somewhere right there it has some info you might find useful issue july 2001 ha some pretty cool stuff to
|
|
|
|
Post by Pat Sullivan on Jan 16, 2008 21:20:24 GMT -5
i just did this. word of advice. take your time with wiring dont cut anything unless you are sure you dont need it. buy a truck with the motor you intend to use and dont scrap it until you are completely done with the swap. it helps to have something to go back and look at.
|
|
|
|
Post by orangeyota on Feb 16, 2008 12:34:31 GMT -5
|
|
