|
|
GEARS
Aug 7, 2006 19:45:46 GMT -5
Post by 87skeeter on Aug 7, 2006 19:45:46 GMT -5
JUST PUT 4.88'S IN THE REAR OF MY 87 TOY.I HAVE SOME BAD BACK LASH AND NO SHIMS TO PUT IN IT.WHERE CAN I FIND SOME SHIMS AND WHERE DO I SHIM THE PINION TO GET RID OF THE BACK LASH?
|
|
|
|
GEARS
Sept 2, 2006 21:40:57 GMT -5
Post by speedy on Sept 2, 2006 21:40:57 GMT -5
Unless I am sadly mistaken, all you have to do to adjust the backlash is use the two screw-in, screw-out adjusters on the sides of the third member to bring the ring gear closer or farther away from the pinion. You would only need shims to adjust the pinion pre-load.
|
|
