Xero
New Member
Posts: 3
|
Post by Xero on Mar 8, 2004 22:55:06 GMT -5
When I accelerate in my T100 , I have a strange spuddering sound. It doesnt effect the way my truck runs. But when in the lower gears 1,2,3 theres a strange sound when I accelerate. When im in idle and rev the engine I do not hear the noise. I looked under neath the truck and saw the my heat shield is burn away a little bit. Thats the only thing I could find that could be possibly making that noise.
Any help on this issue is very appeciated. Thanks
|
|
doperunner
Full Member
"I'm Ron Burgandy??"
Posts: 236
|
Post by doperunner on Apr 29, 2004 20:23:19 GMT -5
exhaust leak in your manifold maybe...run your engine and see if you can see any exhaust coming out from you manifold, or header.
|
|
|
|
Post by t100driver on May 29, 2005 1:19:38 GMT -5
its probably your heat sheild attached to the cross over pipe on the exhuast manifold. Most likely it is ethier cracked or lose. I had the same problem on my 97 t100, the only thing you can do is etheir get a new cross over pipe or put on a set of headers.
|
|
|
|
Post by 4int100 on Aug 18, 2005 13:18:50 GMT -5
Mine did/is doing the same. I've slowly torn pieces off of the side heat shields. I'm about to get the PB Blast and an extension cord for my dremel and get rid of them all together.
|
|
|
|
Post by SantaCruzT100 on Mar 13, 2006 17:56:11 GMT -5
Hey u guys all make sense on here, i have just recently found that my t100 is starting to make that little radle or spudder noise too..i checked around the manifold and everything is tight.....has anyone fixed this problem yet??? what did u do? i'm thinking of checking the cat to see if it's raddling..  |
|
|
|
Post by SantaCruzT100 on Apr 18, 2006 0:14:30 GMT -5
hey i found out the problem..it is the heat shield on the manifold it was cracked and now i just tore it off....i don't see why i'd have to buy a set of headers to fix this...don't get me wrong i'd love too but that 's money i don't have...thanks guys..  |
|
