|
|
Post by bullx59 on Apr 24, 2005 17:34:51 GMT -5
Hey guys i have a 2000 Tundra that i want to sit a little higher without putting a lift on or altering too much what can i do. Like new leaf springs or add a spring? Any tips??
|
|
|
|
Post by lastblast on May 8, 2005 21:54:44 GMT -5
Tuff country has a cheap lift that puts a spacer on top of the coil over and gives you a block for the back. This levels out your truck and gives you about 2" of lift. I would have bought this for my truck had I know all I would get out of the Donahoe coil overs with the Total chaos control arms was 2". That cost me over $3000 where the lift I am talking about cost around $200
|
|
|
|
Post by tundralover on Jan 24, 2006 20:33:52 GMT -5
fabtech makes a good leveling kit for it they have three different stages
|
|
|
|
Post by TundraCrazy01 on Aug 24, 2006 14:45:31 GMT -5
I got the 2.5 Poly Spacer up front and 1 Inch block for the rear.
|
|
|
|
Post by dannyg74 on Oct 1, 2007 16:25:31 GMT -5
I would recommend Daystar's 2.5" spacer in the front and 1" block in the rear. This allowed me to run 285/75/R16 tires but with ample backspacing. This seems the most bang for your buck.
|
|
