Post by waskillywabbit on Aug 26, 2004 12:23:17 GMT -5
Here is my Hi-Lift slider adapter in the pictures and a link with all the specifics and ordering information below:
Hi-Lift Slider Adapter
.JPG)
.JPG)
and yours will be fabricated to the same dimensions. I have a 48" Hi-Lift and the adapter fits perfectly. Your particular jack, if not a Hi-Lift, might require some modification for a perfect fit and several folks have done so. This is a well built product and was fabricated with usability and simplicity in mind. I work in a fab shop as a fabrication engineer and laid out the basic design and my buddy Scott did most of the fabrication as he is a much better welder/machinist than myself. As you can see it more than handles the load of picking up the vehicle.
Item: (1) Hi-Lift Slider Adapter - bare carbon steel w/ 1/2" Grade 5 bolt/nut and rubber shield (loose). Due to possible chipping during shipment or the fact that you might not like red, I won't paint the adapter and I'll leave the rubber shield loose so you can glue it on after you paint the adapter the color of your choice. The adapter piping on top has a 2" ID so it will accommodate the beefiest of round tubing used on your sliders. The adapter slides over the existing lift plate for the Hi-Lift and uses slots on either side and the included bolt to attach to the lift plate. The lift plate will still take the bulk of the loading and the adapter is only to prevent the Hi-Lift from slipping off your round sliders due to the awkward shape and predominantly flat surface of the lift plate.
Cost: $35 shipped anywhere in the continental United States (this includes shipping and packaging).
Payments accepted: Paypal ID - waskillywabbit@charter.net and please verify your address as it will be shipped to the address on your Paypal account or contact me directly via email to arrange for a personal check, money order or cashier's check.
Shipping: I will ship the adapters via USPS and I will notify you when it ships. Adapters will only be shipped as they are completed and the current batch is set to go out the week of Labor Day.
Other points of interest: With over 30 satisfied customers thus far on Yotatech and other 4Runner related forums such as TTORA and 4x4wire, I'd like to say "thank you!" to everyone who has helped fuel my mod madness!
The Hi-Lift Slider Adapter is Tellico and Paragon tested and has been shipped all over the United States and Canada. I'd also like to let you guys know that these are available for purchase and that all the necessary specifications and ordering information is available on the link at the top and there is link on my website.
Please email/PM me with any questions.
Thanks for your support!
Legal junk: Obviously, use this item at your own risk. This is an item that I fabricated for my personal use and I am making it available to you to use at your own risk. I am not liable for any damage to your vehicle, personal injury or any other type of damage as a result of you using this product or your own negligence and/or stupidity. Your payment for the adapter indicates your agreement with this disclaimer.
Hi-Lift Slider Adapter
and yours will be fabricated to the same dimensions. I have a 48" Hi-Lift and the adapter fits perfectly. Your particular jack, if not a Hi-Lift, might require some modification for a perfect fit and several folks have done so. This is a well built product and was fabricated with usability and simplicity in mind. I work in a fab shop as a fabrication engineer and laid out the basic design and my buddy Scott did most of the fabrication as he is a much better welder/machinist than myself. As you can see it more than handles the load of picking up the vehicle.
Item: (1) Hi-Lift Slider Adapter - bare carbon steel w/ 1/2" Grade 5 bolt/nut and rubber shield (loose). Due to possible chipping during shipment or the fact that you might not like red, I won't paint the adapter and I'll leave the rubber shield loose so you can glue it on after you paint the adapter the color of your choice. The adapter piping on top has a 2" ID so it will accommodate the beefiest of round tubing used on your sliders. The adapter slides over the existing lift plate for the Hi-Lift and uses slots on either side and the included bolt to attach to the lift plate. The lift plate will still take the bulk of the loading and the adapter is only to prevent the Hi-Lift from slipping off your round sliders due to the awkward shape and predominantly flat surface of the lift plate.
Cost: $35 shipped anywhere in the continental United States (this includes shipping and packaging).
Payments accepted: Paypal ID - waskillywabbit@charter.net and please verify your address as it will be shipped to the address on your Paypal account or contact me directly via email to arrange for a personal check, money order or cashier's check.
Shipping: I will ship the adapters via USPS and I will notify you when it ships. Adapters will only be shipped as they are completed and the current batch is set to go out the week of Labor Day.
Other points of interest: With over 30 satisfied customers thus far on Yotatech and other 4Runner related forums such as TTORA and 4x4wire, I'd like to say "thank you!" to everyone who has helped fuel my mod madness!
The Hi-Lift Slider Adapter is Tellico and Paragon tested and has been shipped all over the United States and Canada. I'd also like to let you guys know that these are available for purchase and that all the necessary specifications and ordering information is available on the link at the top and there is link on my website.
Please email/PM me with any questions.
Thanks for your support!
Legal junk: Obviously, use this item at your own risk. This is an item that I fabricated for my personal use and I am making it available to you to use at your own risk. I am not liable for any damage to your vehicle, personal injury or any other type of damage as a result of you using this product or your own negligence and/or stupidity. Your payment for the adapter indicates your agreement with this disclaimer.
for seeing a need & filling it!! Later...