|
|
Post by brandon19 on Apr 30, 2008 1:43:26 GMT -5
I have a stock 1988 toyota 4x4 truck and i was wanting to know how big can i safely go on tire size without a lift
|
|
|
|
Post by bowshtr on Apr 30, 2008 6:26:11 GMT -5
You say safely like something bad is going to happen....
This post has been discussed time and time and time again. I understand your new and its your first post. But, read up first before you go asking. IF you cant find the info you need then you post.
|
|
|
|
Post by orangeyota on Apr 30, 2008 21:52:44 GMT -5
maybe 31's on a 10 inch wheel
|
|
|
|
Post by yotanut7 on May 1, 2008 1:02:43 GMT -5
I had 31's on the stock 6 inch wide wheel and i had very little rubbing at full lock and stuff.
|
|
rsdan
Full Member
Posts: 116
|
Post by rsdan on May 2, 2008 22:07:14 GMT -5
33's you can fit safely, take off the front valence and they will fit, they might rub a bit at full lock. If you cut a tiny bit off the fenders they will fit fine. Also you could crank the torsion bars a bit.
|
|
|
|
Post by fourwd1 on May 7, 2008 21:01:13 GMT -5
Since 31" tires was an option from the factory, it's obvious they will fit. 32's will work too w/o any rubbing, staying with a close to stock width rim.
|
|
