|
|
GEARS ?
Dec 9, 2008 16:51:18 GMT -5
Post by toledoyota on Dec 9, 2008 16:51:18 GMT -5
I want to replace the front and rear gears in my 2002 2.7ltr 4cyl tacoma. I am eventually going to be turning 37 inch tires. I am not sure what ratio nor am i sure what size the ring 8"?, 7.5"? 8.4"? i would greatly appreciate it. Thx offroad
|
|
|
|
GEARS ?
Dec 10, 2008 9:28:41 GMT -5
Post by fourwd1 on Dec 10, 2008 9:28:41 GMT -5
7.5" front and 8" rear.
For 37" tires 5.29 or 5.71 gears would work
|
|
|
|
GEARS ?
Dec 10, 2008 14:46:29 GMT -5
Post by Hoodlum on Dec 10, 2008 14:46:29 GMT -5
7.5" front and 8" rear. For 37" tires 5.29 or 5.71 gears would work Tacoma rear's are 8.25  |
|
|
|
GEARS ?
Dec 10, 2008 16:15:41 GMT -5
Post by fourwd1 on Dec 10, 2008 16:15:41 GMT -5
I thought that, but when I was on a couple of R&P sites, they said 8". So I looked a little deeper and found an article saying that it was 8.25" like you say, but "they're commonly referred to as an 8". That must be why R&P sites say it's 8"  |
|
|
|
GEARS ?
Dec 11, 2008 8:15:18 GMT -5
Post by Hoodlum on Dec 11, 2008 8:15:18 GMT -5
I originaly ended up with the wrong gears from Randy's That's how I learned.  lol |
|
|
|
GEARS ?
Dec 11, 2008 21:50:04 GMT -5
Post by Sean on Dec 11, 2008 21:50:04 GMT -5
They both measure the same in diameter apparently but the Taco is usually called an 8.25 or 8.4 and they arent compatible with the older 8" diffs.
|
|
