|
|
Post by obx22re on Jan 4, 2009 18:14:32 GMT -5
Im trying to lift the front of my '92 pickup 2"-2.5" I've looked everywhere and they dont make leveling kits for pre '95 and the smallest kit anyone makes is 4". I DO NOT want to settle for body lift. Id appreciate any tips or info, thanks.
|
|
|
|
Post by yotanut7 on Jan 4, 2009 20:45:05 GMT -5
Crank the torsion bars, get heavier ones and / or ball joint spacers.
|
|
|
|
Post by fourwd1 on Jan 5, 2009 11:15:25 GMT -5
FYI, "cranking" the t-bars will result in a harsher ride, and loss of travel in the other direction (you can't get something for nothing).
|
|
|
|
Post by ediblecrayons03 on Feb 10, 2009 11:06:26 GMT -5
cranking the tbars will also wear your cvs faster. i would recomend ball joint spacers and leave it with that. what are your plans for this truck. you can fit a mild 33 with just the spacer and minimal rubbing. the reason there is less for thie truck ,is because after 95.5 they went to a coil spring front.
ive got a 92 and im running no lift at all and 33s. (about half tread) they fit just fine. (mud flaps and lower valance removed)
|
|
