|
|
Post by yotaaa on Aug 2, 2010 2:03:12 GMT -5
i have an 87 toyota 22r and the engine blew. i replaced everything and put all of it back together. but it is still having problems. it will turn over but it runs really rough and i dont believe its getting oil to the top of the engine... any suggestions?
|
|
|
|
Post by whomadewho on Aug 2, 2010 6:45:58 GMT -5
You might try removing the oil pressure Gage install a pressure Gage,to check and see how many lbs.of oil pressure the engine has. Another quick check - Remove the pressure Gage, disable the engine so it WILL NOT START - Turn the engine over and see if any oil comes out. This will give you a starting point and help isolate the problem. If no oil appears focus on the oil pump,could be an issue with the relief valve. This is a tough one to arm chair diagnose,there is a lot of possibilities.
|
|
|
|
Post by fourwd1 on Aug 2, 2010 20:32:42 GMT -5
It could be many things, and that's not enough info to work with.
What exactly happened, what was replaced, what makes you think there's an oil delivery problem, etc ...
|
|
