|
|
Post by cybersmoke on Nov 11, 2010 18:07:29 GMT -5
I need help! I have a 95 4runner that I replaced the head gaskets on the lost spark. I have replaced the coil, changed the igniter, new dist. and wires. please if anyone has any ideas, i would greatly appreciate suggestions.
|
|
|
|
Post by fourwd1 on Nov 11, 2010 21:21:22 GMT -5
Which engine, 4 cyl or 6 cyl ?
|
|
|
|
Post by cybersmoke on Nov 13, 2010 20:23:03 GMT -5
6
|
|
|
|
Post by Hoodlum on Nov 20, 2010 22:52:49 GMT -5
Is the starter cranking? If not there are 3 grounds and one of them may have been over looked during reassembly.Another thought would be to disconnect each electrical connector and re-connect them.I ended up having one that wasn't locked in even though I had tugged on them a couple of times then it fired right up.
|
|
