89 pickup with 3.0

rebelyell4x4
New Member

Posts: 27

89 pickup with 3.0 Jan 19, 2013 21:19:43 GMT -5

Quote

Post by rebelyell4x4 on Jan 19, 2013 21:19:43 GMT -5

Ok guys, I just bought an 89 pickup with the 3vze motor. I have always dealt with the 22r previously and don't know anything about this 3.0 liter. I'm looking to overhaul it. Any tips or pointers as far as parts to go with? I used lc engineering when i used to mess with the 22r. I want it to be reliable! Thanks in advance!!

fourwd1 Global Moderator TOR Senior Member ROCK ABUSER Posts: 6,976	89 pickup with 3.0 Jan 31, 2013 19:16:47 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by fourwd1 on Jan 31, 2013 19:16:47 GMT -5 Check out engnbldr.com. Good parts, prices, and service.
	- - Seen in FOUR WHEELER magazine July 2006, OFF-ROAD magazine Feb 2007 - - '84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, 2" drive train lift, AP hy-steer, BudBuilt x-member/skidplate, 36" TSLs, 30 spline Longs, Chevys '83 P/U - Buick 231 V6, Holley 4 bbl, Weiand intake, TH350 L/U ... '89 4Runner - stock www.cardomain.com/id/fourwd1

rebelyell4x4 New Member Posts: 27	89 pickup with 3.0 Feb 1, 2013 21:15:24 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by rebelyell4x4 on Feb 1, 2013 21:15:24 GMT -5 Thanks!! I appreciate it!

Post by rebelyell4x4 on Jan 19, 2013 21:19:43 GMT -5

Post by fourwd1 on Jan 31, 2013 19:16:47 GMT -5

Post by rebelyell4x4 on Feb 1, 2013 21:15:24 GMT -5